The flag was used for a short while during the v0.5 development cycle,
four years ago. Remove it, it's long overdue.
PR-URL: https://github.com/iojs/io.js/pull/262
Reviewed-By: Bert Belder <bertbelder@gmail.com>
The targets upload to nodejs.org but that is the joyent/node website.
PR-URL: https://github.com/iojs/io.js/pull/262
Reviewed-By: Bert Belder <bertbelder@gmail.com>
For targets that need the binary: don't invoke `make all` as part of the
recipe, just depend on the $(NODE_EXE) target.
PR-URL: https://github.com/iojs/io.js/pull/262
Reviewed-By: Bert Belder <bertbelder@gmail.com>
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
* Allow running tests in mixed parallel/sequential modes
* Add -J flag for running tests on all available CPUs
* Support TEST_THREAD_ID in test/common.js and use it for tmpDir and PORT
* make: use -J flag
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
PR-URL: https://github.com/iojs/io.js/pull/172Fix: iojs/io.js#139
Remove the dependency on the 'sysconfig' module, it breaks the build
when $(PYTHON) is python 2.6.
PR-URL: https://github.com/node-forward/node/pull/39
Reviewed-By: Fedor Indutny <fedor@indutny.com>
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
Original commit message:
timers: use uv_now instead of Date.now
This saves a few calls to gettimeofday which can be expensive, and
potentially subject to clock drift. Instead use the loop time which
uses hrtime internally.
In addition to the backport, this commit:
- keeps _idleStart timers' property which is still set to
Date.now() to avoid breaking existing code that uses it, even if
its use is discouraged.
- adds automated tests. These tests use a specific branch of
libfaketime that hasn't been submitted upstream yet. libfaketime
is git cloned if needed when running automated tests.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Make the build rule depend on the build artifact (weakref.node) itself
rather than the directory it's built in. Depending on the directory
means that a build failure won't trigger a rebuild on the next
invocation because the directory's timestamp has been updated.
This is a back-port of commit 1189571 from the master branch that
hopefully fixes the following CI error:
executing: make test/gc/node_modules/weak/build/
make: *** No rule to make target `test/gc/node_modules/weak/build/'.
Command exited with non-zero: make test/gc/node_modules/weak/build/
Build step 'Execute NodeJS script' marked build as failure
Make the build rule depend on the build artifact (weakref.node) itself
rather than the directory it's built in. Depending on the directory
means that a build failure won't trigger a rebuild on the next
invocation because the directory's timestamp has been updated.
Don't run configure when the configure script has been touched. Doing so
would be okay if the Makefile passed the original arguments to configure
but it doesn't - it runs configure without any arguments, effectively
destroying the current configuration.
Remove this misfeature and instead print an error message telling the
user to (re-)run configure.
Preserve default install prefix seen in process.config, but use DESTDIR
for installing to deliniate 32/64 versions, avoid conflicts with PREFIX
settings in config.mk
Preserve default install prefix seen in process.config, but use DESTDIR
for installing to deliniate 32/64 versions, avoid conflicts with PREFIX
settings in config.mk
This change introduces support for the common PREFIX variable in the
Makefile and install.py, instead of having /usr/local hardcoded. This
makes it much easier to install node to custom locations e.g. in a
user's home directory.
The PREFIX variable defaults to /usr/local.
For example, to cross-compile from my OS X laptop for Raspberry Pi, you would
do something like:
$ make binary BINARYNAME=node-v`python tools/getnodeversion.py`-linux-arm-pi \
DESTCPU=arm CONFIG_FLAGS="--dest-os=linux"
- Improved styling of download links.
- index.html#download now redirects to /download/
- Added missing hyphens, and added the missing "and 64-bit" for the Mac
Installer.
Ben Noordhuis
Steven R. Loomis
Fedor Indutny
Jose Luis Rivas
Forrest L Norvell
Ray Donnelly
Julien Gilli
Timothy J Fontaine
Fedor Indutny
Trevor Norris
Olof Johansson
isaacs
Nathan Rajlich
Adam Malcontenti-Wilson
Michael Axiak
Bearice Ren
Golo Roden