Interpretation of escape sequences with echo is not as consistent
across platforms as printf, so use the latter instead.
PR-URL: https://github.com/nodejs/node/pull/11466
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
I noticed that the link to http-parser is pointing to the joyent
organization. There is a redirect to the nodejs organization but
perhaps this should be updated anyway.
PR-URL: https://github.com/nodejs/node/pull/11477
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
If any tests leave processes running after testing results are complete,
fail the test run.
PR-URL: https://github.com/nodejs/node/pull/11269
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
PR-URL: https://github.com/nodejs/node/pull/11482
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
The IPC channel is referenced with the message event too.
PR-URL: https://github.com/nodejs/node/pull/11494
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
The intention of test case is to make sure that `timeout` property is honored
and the code in context terminates and throws correct exception. However in
test case, the code inside context would complete before `timeout` for windows
and would sometimes fail. Updated the code so it guarantee to not complete
execution until timeout is triggered.
Fixes: https://github.com/nodejs/node/issues/11261
PR-URL: https://github.com/nodejs/node/pull/11530
Reviewed-By: James M Snell <jasnell.gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Josh Gavant <josh.gavant@outlook.com>
* Remove comment referring to the CommonJS Unit Testing 1.0 spec. This
module is no longer intended to comply with that spec.
* Remove puzzling "THIS IS NOT TESTED NOR LIKELY TO WORK OUTSIDE V8!"
comment. No doubt, it made sense at one time.
* Favor `===` over `==` in two places.
PR-URL: https://github.com/nodejs/node/pull/11511
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Joyee Cheung <joyeec9h3@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Refs: https://github.com/nodejs/node/issues/9399
PR-URL: https://github.com/nodejs/node/pull/11548
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Communicate about leaked globals via `AssertionError` rather than
`console.log()`.
PR-URL: https://github.com/nodejs/node/pull/11547
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Yuta Hiroto <hello@about-hiroppy.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Add documentation for http clientRequest.aborted.
PR-URL: https://github.com/nodejs/node/pull/11544
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
* Change === to == in one place
* Add explanation about another non-strict if-statement
PR-URL: https://github.com/nodejs/node/pull/11513
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Remove the numbers from the comments to make it clear that
assert does not follow the
[CJS spec](http://wiki.commonjs.org/wiki/Unit_Testing/1.0).
Additionally, clean up the existing comments for consistent
formatting/language and ease of reading.
PR-URL: https://github.com/nodejs/node/pull/10579
Fixes: https://github.com/nodejs/node/issues/9063
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
new year new alias
PR-URL: https://github.com/nodejs/node/pull/10586
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
We were transporting the heap statistics as uint32 values to JS land but
those wrap around for values > 4 GB. Use 64 bits floats instead, those
should last us a while.
Fixes: https://github.com/nodejs/node/issues/10185
PR-URL: https://github.com/nodejs/node/pull/10186
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Evan Lucas <evanlucas@me.com>
* use common.mustCall() where appropriate
* Buffer.allocUnsafe() -> Buffer.alloc()
* do crypto check before loading any additional modules
* specify 1ms duration for `setTimeout()`
PR-URL: https://github.com/nodejs/node/pull/10225
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Benjamin Gruenbaum <benjamingr@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Changed authors listing from `Noah Rose` to `Noah Rose Ledesma`.
PR-URL: https://github.com/nodejs/node/pull/10945
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
This commit clarifies variables in the Filesystem docs.
Prior, the documentation for fs.write() had an ambiguous
remark on the parameters of offset and length.
Therefore, this commit makes explicit that the length parameter
in fs.write() is used to denote the number of bytes, which is
a clearer reference for its usage.
PR-URL: https://github.com/nodejs/node/pull/9792
Ref: https://github.com/nodejs/node/issues/7868
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Add links to the engine classes for the zlib single-call
convenience methods.
PR-URL: https://github.com/nodejs/node/pull/10829
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Daniel Bevenius <daniel.bevenius@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/nodejs/node/pull/10616
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Prince John Wesley <princejohnwesley@gmail.com>
The guide for writing tests is missing information on how tests are
named. This adds that information.
There is also some copy-editing done on the first paragraph of the
guide.
PR-URL: https://github.com/nodejs/node/pull/10584
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Italo A. Casas <me@italoacasas.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
git apply does not preserve the original commit message. These updated
instructions offer a simpler flow for backporting.
PR-URL: https://github.com/nodejs/node/pull/10665
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Michal Zasso <targos@protonmail.com>
The COLLABORATOR_GUIDE was still listing v0.10 and v0.12 as LTS when
they are EOL now.
PR-URL: https://github.com/nodejs/node/pull/10720
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Currently when running make node_g the following error is displayed:
if [ ! -r node -o ! -L ]; then ln -fs out/Debug/node node_g; fi
/bin/sh: line 0: [: argument expected
It looks like there was a typo for the NODE_EXE where node became
lowercase instead of uppercase.
Ref: https://github.com/nodejs/node/pull/9827
PR-URL: https://github.com/nodejs/node/pull/10153
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Italo A. Casas <me@italoacasas.com>
The node -> out/*/node symlink is getting recreated in parallel with
other targets in the makefile which require it (e.g. test-ci) and
this seems to be causing a race condition which is showing up on AIX
Fixes: https://github.com/nodejs/node/issues/9825
PR-URL: https://github.com/nodejs/node/pull/9827
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-by: Michael Dawson <michael_dawson@ca.ibm.com>
Unsanitized paths containing line feed characters can be used for
header injection and request splitting so reject them with an exception.
There seems to be no reasonable use case for allowing control characters
(characters <= 31) while there are several scenarios where they can be
used to exploit software bugs so reject control characters altogether.
PR-URL: https://github.com/nodejs/node/pull/8923
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Evan Lucas <evanlucas@me.com>
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: not-an-aardvark <not-an-aardvark@users.noreply.github.com>
This test is newly added to v4.x stream and is consistently failing.
We have a couple of issues with pseudo-tty tests in AIX, and while
the investigation is going on, need to skip this test to make CI green.
PR-URL: https://github.com/nodejs/node/pull/11602
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Myles Borins <myles.borins@gmail.com>
Use of abort() was added in 34febfbf4, and changed to ABORT()
in 21826ef21a, but conditional+ABORT() is better expressesed
using a CHECK_xxx() macro.
See: https://github.com/nodejs/node/pull/9409#discussion_r93575328
PR-URL: https://github.com/nodejs/node/pull/10413
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: James M Snell <jasnell@gmail.com>
This makes sure that we dump a backtrace and use raise(SIGABRT) on
Windows.
PR-URL: https://github.com/nodejs/node/pull/9613
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Fix leaking the BIO in the error path. Introduced in commit 34febfbf4
("crypto: fix handling of root_cert_store").
PR-URL: https://github.com/nodejs/node/pull/9604
Refs: https://github.com/nodejs/node/pull/9409
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
SecureContext::AddRootCerts only parses the root certificates once and
keeps the result in root_cert_store, a global X509_STORE. This change
addresses the following issues:
1. SecureContext::AddCACert would add certificates to whatever
X509_STORE was being used, even if that happened to be root_cert_store.
Thus adding a CA certificate to a SecureContext would also cause it to
be included in unrelated SecureContexts.
2. AddCRL would crash if neither AddRootCerts nor AddCACert had been
called first.
3. Calling AddCACert without calling AddRootCerts first, and with an
input that didn't contain any certificates, would leak an X509_STORE.
4. AddCRL would add the CRL to whatever X509_STORE was being used. Thus,
like AddCACert, unrelated SecureContext objects could be affected.
The following, non-obvious behaviour remains: calling AddRootCerts
doesn't /add/ them, rather it sets the CA certs to be the root set and
overrides any previous CA certificates.
Points 1–3 are probably unimportant because the SecureContext is
typically configured by `createSecureContext` in `lib/_tls_common.js`.
This function either calls AddCACert or AddRootCerts and only calls
AddCRL after setting up CA certificates. Point four could still apply in
the unlikely case that someone configures a CRL without explicitly
configuring the CAs.
PR-URL: https://github.com/nodejs/node/pull/9409
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Reviewed-By: Shigeki Ohtsu <ohtsu@ohtsu.org>
An application using node built as a shared library may legitimately
implement its own signal handling routines. Current behaviour is
to squash all signal handlers on node startup. This change will
stop that behaviour when node is built as a shared library.
PR-URL: https://github.com/nodejs/node/pull/10539
Fixes: https://github.com/nodejs/node/issues/10520
Refs: https://github.com/nodejs/node/pull/615
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
https://github.com/nodejs/node/pull/11086 had introduced a regression
that broke command line options processing for tools/test.py.
Basically, it made tools/test.py discard the command line argument that
would be passed after `--abort-on-timeout`. For instance, when running:
```
$ python tools/test.py --abort-on-timeout path/to/some-test
```
all tests would be run because the last command line argument
(`/path/to/some-test`) would be discarded.
This change fixes this regression.
Refs: https://github.com/nodejs/node/pull/11086
PR-URL: https://github.com/nodejs/node/pull/11153
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Currently, when a process times out, it is terminated by sending it the
SIGTERM signal. Sending SIGBART instead allows the operating system to
generate a core file that can be investigated later using post-mortem
debuggers such as llnode or mdb_v8.
This can be very useful when investigating flaky tests that time out,
since in that case the failure is difficult to reproduce, and being able
to look at a core file makes a big difference.
With these changes, passing the --abort-on-timeout command line option
to tools/test.py now sends SIGABRT to processes timing out on all
platforms but Windows.
PR-URL: https://github.com/nodejs/node/pull/11086
Ref: https://github.com/nodejs/node/issues/11026
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
Reviewed-By: Sakthipriyan Vairamani <thechargingvolcano@gmail.com>
Reviewed-By: Santiago Gimeno <santiago.gimeno@gmail.com>
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Corrected parameter for running tests on Windows. Without the corrected
parameters, Windows users encounter an error about failing to sign the
build, "Failed to sign exe", which can be discouraging to new Windows
community members.
PR-URL: https://github.com/nodejs/node/pull/10686
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Bartosz Sosnowski <bartosz@janeasystems.com>
Added note about vcbuild being included as batch to clarify
that it's not needed from msbuild tools or visual studio.
PR-URL: https://github.com/nodejs/node/pull/8704
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Franziska Hinkelmann <franziska.hinkelmann@gmail.com>
Reviewed-By: Rich Trott <rtrott@gmail.com>
Reviewed-By: Ilkka Myller <ilkka.myller@nodefield.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
__dirname is path.dirname(__filename), but its docs, specifically the
attempt to describe javascript scope in terms of "running" and
"executing" had drifted apart. Rework to describe one as a variation of
the other, move the example, and just describe the names in terms of the
module, and it's local variables rather than the ill defined execution
concepts.
Fix: https://github.com/nodejs/node/issues/5525
PR-URL: https://github.com/nodejs/node/pull/10527
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Gibson Fahnestock <gibfahn@gmail.com>
`killSignal` option accepts the signal name or signal number as well.
PR-URL: https://github.com/nodejs/node/pull/10424
Reviewed-By: Julian Duque <julianduquej@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
The `hints` value will be a number. To specify more than one hints,
their corresponding bits have to be set. So bitwise OR should be used
instead of logical OR.
PR-URL: https://github.com/nodejs/node/pull/11037
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: Sam Roberts <vieuxtech@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
As it is, each line in the deprecation heading which are wrapped at 80
characters in the *.md files, are shown in different lines. For example
> Stability: 0 - Deprecated: Use
> `Buffer.from(arrayBuffer[, byteOffset [, length]])`
> instead.
is shown in three different lines. This patch replaces the newlines
with space characters, so that the output will be in single line.
PR-URL: https://github.com/nodejs/node/pull/11074
Reviewed-By: Anna Henningsen <anna@addaleax.net>
Reviewed-By: Jeremiah Senkpiel <fishrock123@rocketmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Timothy Gu <timothygu99@gmail.com>
Reviewed-By: James M Snell <jasnell@gmail.com>
Reviewed-By: Luigi Pinca <luigipinca@gmail.com>
Reviewed-By: Michaël Zasso <targos@protonmail.com>
In closed environments, self-signed or privately signed certificates are
commonly used, and rejected by Node.js since their root CAs are not
well-known. Allow extending the set of well-known compiled-in CAs via
environment, so they can be set as a matter of policy.
PR-URL: https://github.com/nodejs/node/pull/9139
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-By: Fedor Indutny <fedor.indutny@gmail.com>
Dmitry Tsvettsikh
Brian White
Daniel Bevenius
Rich Trott
Jason Wilson
Diego Rodríguez Baquero
Kunal Pathak
Amelia Clarke
Zach Bjornson
Arseniy Maximov
James M Snell
Kai Cataldo
Myles Borins
Ben Noordhuis
Noah Rose Ledesma
Timothy Gu
Adrian Estrada
Jessica Quynh Tran
Anna Henningsen
Sam Roberts
Evan Lucas
Matt Crummey
sxa555
Rod Vagg
Gireesh Punathil
Adam Langley
Cristian Cavalli
Julien Gilli
Jonathan Boarman
rainabba
Sakthipriyan Vairamani (thefourtheye)